The ADT outdoor IP video camera over the garage works well, supports night vision, and is activated automatically via a motion sensor, though you can also log into your Pulse web portal or mobile app and get a live view at any time. However, I experienced several instances where the Pulse software refused to connect to the camera. A technician's visit didn't cure the problem, though he did install a weatherproof sleeve that was overlooked during the initial installation and seemed to reduce the problem somewhat. The ADT Pulse mobile software was updated during my first three months with the system, and since that's happened I've only experienced one outage that was cured by my logging out and back in again.
The most common type of motion sensor is the infrared sensor. These sensors emit infrared light and are triggered when they detect body heat. They identify intruders by comparing the heat of inanimate objects with the heat of anything moving in its field of detection— like a human. Many motion sensors are designed with Pet Immunity to avoid false alarms being triggered by small pets in the home.
Use to have the system at my other house. A few times I forgot the code or put it in wrong and I received a phone call. If you give them a secret code then they will call off the police for you. May be they should have 2 secret codes one for when you are in danger (like maybe if there is a person standing beside you with a gun forcing you give the correct code) and one for when you are not in danger.
Hello Paul. We are sorry for your experience with one of our authorized dealers. Millennium Alarm Systems INC is an independently owned and operated retailer of our monitoring services. Therefore, they install / sell their own alarm equipment and are not owned by ADT. If you have any unresolved concerns with Millennium, we can reach out to them on your behalf to assist further. Thank you. -Andrew
As you can see, the control panel isn't as pretty as Vivint's, but Vivint expects you to do more with its panel than ADT does. The Safewatch has a monochrome touch screen and a somewhat arcane menu structure. You can select zones to be disarmed while leaving other zones armed (though I didn't enable this in my house). Key system functions are performed with a four-digit security code in addition to a menu command so the system isn't vulnerable to just anyone standing in front of it. The panel has a lot of other functionality, including the ability to adjust your lighting and appliances from its menu and even check weather, traffic, or news. But in the end you'll likely use it mainly for getting in and out of your house. The menu system is rich, but the ADT master web portal and the Pulse mobile app are far easier tools to use for working with your system. You won't even need to punch in your alarm code if you opt for one of the Safewatch's bundled fobs.
Every ADT-Monitored center puts an extensive network, including system professionals, on call to help protect the people and things you care about most. You can expect ADT security 24 hours a day, 7 days a week, 365 days a year. All throughout the United States, ADT Security has a full-scale network of linked command centers strategically positioned to successfully offer continuous monitoring of your Protect Your Home-configured security system. The state-of-the-art technology integrated into this resilient, hyper-connected operation is only one of the many reasons more people choose ADT-Monitored home security over any other security monitoring company in America. We provide protection against potential hazards that maybe out of your hands including:
Like all home security companies, ADT offers a number of different packages to choose from. In addition to monthly monitoring costs, you also need to consider equipment costs, activation fees, installation costs, and the extra expense of any upgrades you select. Because ADT offers so many options and upgrades, it’s easy to end up with a customized ADT package that is more expensive than its competitors. Just be sure to keep a tally as you work with an ADT security pro to put together the right package for your home. If budget constraints are a factor, let your representative know up-front how much you can afford.
Hey Jen, the thing I have liked most about ADT is you get the most respect out of the yard sign for it. Sounds like you are in the ghetto (or bad part of town) like me and just having the sign alone gives my home the respect it needs on the block. I like the service too but the sign is the best part, also nice if you work graveyards or weird shifts like lots of us in the hood do.
Your base security system package normally includes 3 window and door sensors, but we’ve been given special permission by ADT to throw in 3 EXTRA sensors for FREE with every system we give away. The FREE1 system ($850 retail value) plus the extra sensors ($450 retail value) gives you a total value that is more than you’ll get with other security system retailers.

During our tests, we strongly considered home automation options, which allow you to remotely control features of your home, such as lights and door locks. Vivint really impressed us with its seamless automation integration. We loved being able to see who was at the front door directly from the app. But we wanted to figure out what these differences meant on a day-to-day basis: Which features were necessary for improved peace of mind? Which would be easiest to integrate into our daily routines?
If you live in a small apartment and want to keep tabs on things when you're not home, a security camera can get the job done for a lot less money than what you'll pay for a full security system. Nearly all standalone security cameras connect to your home's Wi-Fi so you can see what's going on from your phone or tablet, and most have built-in sensors that detect motion and sound and will send push and email notifications when those sensors are triggered. You can usually tweak the camera's motion sensitivity to prevent false alarms due to pet activity or passing cars if the camera is near a window, and you can create a schedule that turns the sensors on and off during certain hours of the day.
The Ring and the Nest thermostats also use my home Verizon Fios-based Wi-Fi network as their primary path to the Internet. All the other devices either don't need my internet or are connected via cabled connections through my Fios router (you'll only need one port open) and their own wireless connectivity tied to the Z-Wave controller ADT installed in my basement. If the primary internet goes down, the CellGuard backup system kicks in, and every device has battery backup in case the power goes out. The Ring and Nest devices, however, are Wi-Fi-only, and this posed a problem for the Ring as my front door proved a pretty effective wireless signal killer. Initially, the Ring only worked about 20 percent of the time. ADT, however, immediately ordered and, a few days later, installed a Ring range extender, that solved the problem. I also could have ordered this myself or simply augmented my Wi-Fi network signal strength (which I've done since), but I wanted to see what ADT would do on its own first.
I’ve called ADT for service or explaination of certain items, can say that I was pleased with the rep or the reasoning for why the issue is what it is but I have to be opened minded to quidelines and policies of a structured company. We give the rep a hard time because we want stella service be “customer is always right” but we can be horrible consumers then the rep rebuttal is on the deffensive so we will not meet that common ground.
I upgraded from ADT basic after 8 years to ADT Pulse and it feels like a whole new company and equipment. I went from having to enter my keycode into the panel to now being able to use the Pulse app from our phones and tablets and having live access through the cameras anytime. It cost about $15 more a month than what I was paying but we got rid of the land line and are loving it. Get what you think you might want ahead of time so you don't have to pay to upgrade later. They have good deals and promo's as well.
Just need one camera to cover your front door? In it for the automation, along with the smart home security? You can purchase pretty much any equipment piece independent of a full security system. For example, companies like Nest and Samsung offer indoor and outdoor cameras, thermostats, doorbell cameras, and their own simple alarm systems. You can purchase any of this à la carte, without the obligation of a starter kit. If you decide you want a fuller system down the line, you can always integrate those individual purchases.

When we purchased our system it was for peace of mind for our home. Never would we have thought that it would be what saves our daughter. Thanks to ADT when her ex-boyfriend came through the front door they alerted the police of the intruder alert and just almost a mins after police showed and he was found trying to kidnapp my daughter. The quick response of alerting the police is what makes me stay and will forever be a ADT customer. Forever grateful.

The Pulse app also lets you access ADT's Home View, though you'll need to initially configure that using the web portal. Home View lets you create a visual blueprint of your house room by room and map where all your smart devices and security nodes are located. Once configured, Home View color-codes these device icons to show their status and summary activity screens, and if one of them is a camera, you can simply click on it to get a live view of what the cam is seeing.
The majority of home security companies recommend or require you to call when ordering your service. We recommend this too, as you can often get a lower price by discussing your quote with a salesperson. Sometimes home security systems require an installation fee, equipment fees, or an activation fee. It’s quite common that special deals can waive or lower those. In fact, sales reps from eight of the nine security companies we considered offered us a discount over the phone — we didn’t even have to ask.
Magnetic door/window sensors are made up of two small magnetic pieces; one is mounted to the top of the door or window frame, while the second is placed directly on the door or window. Vanishing sensors can be placed inside the door/window and inside the frame so no one knows they are there. The two sensor pieces are in contact with each other while the door/window is closed. When they are opened, the sensors separate and an alarm is triggered.
×